CLI Guide

Example (Isolated)
Dell# show vlan private-vlan isolated
Primary Secondary Type Active Ports
------- --------- --------- ------ ----------
10 primary Yes Gi 2/1,3
100 isolated Yes Gi 2/2,4-6
200 isolated Yes Gi 3/2,4-6
Example
(Community)
Dell# show vlan private-vlan community
Primary Secondary Type Active Ports
------- --------- --------- ------ -----------
10 primary Yes Gi 2/1,3
101 community Yes Gi 2/7-10
20 primary Yes Po 10, 12-13
Gi 3/1
201 community No
202 community Yes Gi 3/11-12
Example (Specic)
Dell# show vlan private-vlan interface Gi 2/1
Primary Secondary Type Active Ports
------- --------- --------- --------------------
10 primary Yes Gi 2/1
Usage Information If the VLAN ID is that of a primary VLAN, the entire private VLAN output is displayed, as shown below. If the VLAN
ID is a secondary VLAN, only its primary VLAN and its particular secondary VLAN properties are displayed, as
shown in the second Example.
Example
Dell# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- -------------------
10 primary Yes Gi 2/1,3
102 isolated Yes Gi 0/4
101 community Yes Gi 2/7-10
Example
Dell#show vlan private-vlan 102
Primary Secondary Type Active Ports
------- --------- --------- --------------------
10 Primary Yes Po 1
Gi 0/2
102 Isolated Yes Gi 0/4
Related Commands
private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan — displays type and status of PVLAN interfaces.
show vlan private-vlan mapping — displays the primary-secondary VLAN mapping.
switchport mode private-vlan — sets PVLAN mode of the selected port.
show vlan private-vlan mapping
Display primary-secondary VLAN mapping.
Syntax
show vlan private-vlan mapping
Defaults none
Command Modes
• EXEC
1034 Private VLAN (PVLAN)