Manualshelf

User's Manual

ManualsBrandsDell ManualsSoftwareDell Fluid Cache for DAS
29303132333435363738
Message ID: 2916| LICENSE_EVAL_VALID_EVENT
The message indicates that you are running an evaluation license. The message also indicates the number of days
remaining to run the software in evaluation mode. To resolve the issue, you must install a valid license.
Message ID: 2917| LICENSE_EVAL_EXPIRED_90_EVENT
The message indicates that you are running on an expired evaluation license. No configuration changes are allowed.
The message also indicates the number of days you have run the software with an expired license (90 days maximum).
To resolve the issue, you must install a valid license.
Message ID: 2918| LICENSE_EVAL_EXPIRED_180_EVENT
The message indicates that you are running the software on an expired evaluation license. No configuration changes
are allowed. The message also indicates the number of days you have run the software with an expired license (180
days maximum). To resolve the issue, you must install a valid license.
Message ID: 2919| LICENSE_EXPIRED_NO+CONFIG+CHANGE
The message indicates that you are running on an expired or invalid license. To resolve the issue, you must install a valid
license.
Message ID: 2922| INSUFFICIENT_MEMORY
The message indicates that there is not enough memory to run necessary services. To resolve the issue, you must run
on a system with adequate memory.
Message ID: 2923| CACHEDEV_VIEW_INCOMPLETE
The message indicates that one or more cache devices are missing and the cache is unresponsive. To resolve the issue,
insert the missing cache device. If the cache device was unplugged, reactivate it.
Message ID: 2930| STORAGE_MODE_DEGRADED_TO_WRITE_THROUGH
The message indicates that even though caching was enabled in write-back mode, it is currently operating in write-
through mode. To resolve the issue, add a PCIe SSD to the cache pool.
Message ID: 2931| STORAGE_MODE_DEGRADED_TO_PASS_THROUGH
The message indicates that even though caching was enabled in write-back or write-through mode, it is currently
operating in pass-through mode. To resolve the issue, add one or more PCIe SSDs to the cache pool.
33