Product manual

SAVVIO 10K.6 SAS PRODUCT MANUAL, REV. C 51
11.3.1 Inquiry data
Table 9 lists the Inquiry command data that the drive should return to the initiator per the format given in the SAS Interface
Manual.
Table 9 Savvio inquiry data
BYTES DATA (HEX)
0-15 00 00 xx** 12 8B 01 PP 02 53 45 41 47 41 54 45 20 Vendor ID
16-31 [53 54 39 30 30 4D 4D 30 30 30 36] 20 20 20 20 20
Product ID
32-47 R# R# R# R# S# S# S# S# S# S# S# S# 00 00 00 00
48-63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
64-79 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80-95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
96-111 00 43 6F 70 79 72 69 67 68 74 20 28 63 29 20 32* *Copyright
112-127 30* 30* 39* 20 53 65 61 67 61 74 65 20 41 6C 6C 20
notice
128-143 72 69 67 68 74 73 20 72 65 73 65 72 76 65 64 20
* Copyright year (changes with actual year).
** SCSI Revision support. See the appropriate SPC release documentation for definitions.
PP 10 = Inquiry data for an Inquiry command received on Port A.
30 = Inquiry data for an Inquiry command received on Port B.
R# Four ASCII digits representing the last four digits of the product firmware release number.
S# Eight ASCII digits representing the eight digits of the product serial number.
[ ] Bytes 16 through 26 reflect model of drive. The table above shows the hex values for Model ST900MM0006.
Refer to the values below for the values of bytes 16 through 26 of you particular model:
ST900MM0026 53 54 39 30 30 4D 4D 30 30 32 36
ST900MM0036
53 54 39 30 30 4D 4D 30 30 33 36
ST900MM0046 53 54 39 30 30 4D 4D 30 30 34 36
ST600MM0006 53 54 36 30 30 4D 4D 30 30 30 36
ST600MM0026 53 54 36 30 30 4D 4D 30 30 32 36
ST600MM0046 53 54 36 30 30 4D 4D 30 30 34 36
ST450MM0006 53 54 34 35 30 4D 4D 30 30 30 36
ST450MM0026 53 54 34 35 30 4D 4D 30 30 32 36
ST450MM0046 53 54 34 35 30 4D 4D 30 30 34 36
ST300MM0006 53 54 33 30 30 4D 4D 30 30 30 36
ST300MM0026 53 54 33 30 30 4D 4D 30 30 32 36
ST300MM0046 53 54 33 30 30 4D 4D 30 30 34 36