Owners Manual

PS6610 Hardware Owner's Manual 3 Control Module Maintenance

Caution: To reduce the risk of losing or damaging the microSD card, do not remove it until you are

ready to install it in the replacement control module.

1. Firmly push the card into its housing to release the spring mechanism (see Figure 17). The

microSD card will become partially ejected from the housing.

2. Gently pull the card straight out of the housing.

3. Place the microSD card on a flat surface where it will be protected from electrostatic discharge.

Figure 17: Ejecting the MicroSD Card

Insert the MicroSD Card

1. Align the replacement microSD card so the arrow on the card points toward the housing (Figure

18). When correctly positioned, the gold contacts will be facing downward, and inward toward the

housing.

2. Firmly press the card into the housing until it clicks into place. Confirm that the card is securely

seated by pressing to ensure the release spring mechanism is engaged and ejects the SD card.

Then, reinsert the SD card and ensure it is seated securely by pulling gently on the SD card.