Install Guide

PS6210 Install and SetupGuide
5 Storage Allocation
volume select volume_name show
– UsingtheGUI,expandVolumesinthefar-leftpanel,selectthevolumename,andclicktheConnections
tab.
4. Onthecomputer,usetheiSCSIinitiatorutilitytospecifythegroupIPaddressastheiSCSIdiscovery
address.Iftheinitiatorsupportsthediscoveryprocess,itwillreturnalistofiSCSItargetsthatthecomputer
canaccess.
Iftheinitiatordoesnotsupportdiscovery,youmustalsospecifythetargetnameand,insomecases,the
standardiSCSIportnumber(3260).
5. UsetheiSCSIinitiatorutilitytoselectthedesiredtargetandlogintothetarget.
WhenthecomputerconnectstotheiSCSItarget,itseesthevolumeasaregulardiskthatcanbeformattedusing
thenormaloperatingsystemutilities.Forexample,youcanpartitionthediskandcreateafilesystem.
28