Install Guide

PS6210 Install and Setup Guide

2 Rack Mounting the Array

Withassistance,liftthearray,keepingthearraylevel,andslideitontothemountingrailsuntilthearray

engages.

Attach the Array to the Mounting Rails

Makesurethearraycaptivefastenersonthefrontofthearraylineupwiththethreadedholesonthefrontofthe

mountingrails,andmanuallysecurethecaptivefastenerstotherails.

Note: Donotovertightenthethumbscrews.

Installing the Bezel

Thestepsforinstallingthebezelarethesameforallarraymodels:

1. Hooktherightendofthebezelontotherightsideofthechassis.

2. Swingtheleftendofthebezeltowardtheleftsideofthechassis.

3. Pressthebezelintoplaceuntilthereleaselatchcloses.

4. Usingthekeyprovided,lockthebezelandstorethekeyinasafeplaceasshowninFigure3andFigure4.

Figure 3: Installing the Bezel (2U Array)