Owners Manual

Hardware Owner's Manual

3 Maintaining Control Modules

1. Firmly push the card into its housing to release the spring mechanism (callout 2 in Figure 20). The microSD

card will be partially ejected from the housing.

2. Gently pull the card straight out of the housing (callout 3 in Figure 20).

3. Place the microSD card on a flat surface where it will be protected from electrostatic charge.

Figure 20: Ejecting the MicroSD Card

Inserting the MicroSD Card

1. Align the replacement microSD card so the arrow on the card points towards the housing (Figure 21). When

correctly positioned, the gold contacts will be facing downward, and inward towards the housing.

2. Firmly press the card into the housing until it clicks into place. Confirm that the card is securely seated by

pulling gently on the card afterwards.