Owners Manual
Table Of Contents
- Preface
- 1 Basic Array Information
- 2 Maintaining Disks
- 3 Maintaining Control Modules
- Supported Control Modules
- Interpreting Control Module LEDs
- Control Module Handling Requirements
- Identifying Control Module Failures
- Understanding Failover Behavior
- Maintaining Control Module Firmware
- Connecting Network Cables
- Removing a Control Module
- Installing a Control Module
- Replacing the Compact Flash Card
- 4 Maintaining Power Supply and Cooling Modules
- A Environmental, Power, and Other Specifications
- Index
1–1
1 Basic Array Information
This chapter includes basic information about PS3000 Series arrays:
• Array Front and Back Panels on page 1-1
• Interpreting Operations Panel LEDs on page 1-2
• Using an Electrostatic Wrist Strap on page 1-4
• Shutting Down and Restarting an Array on page 1-4
Array Front and Back Panels
The front and back panels of a PS3000 Series array are shown below.
Figure 1-1: PS3000 Series Front Panel
Figure 1-2: PS3000 Series Back Panel