Owners Manual
Table Of Contents
- Preface
- 1 Basic Array Information
- 2 Maintaining Disks
- 3 Maintaining Control Modules
- Supported Control Modules
- Interpreting Control Module LEDs
- Control Module Handling Requirements
- Identifying Control Module Failures
- Understanding Failover Behavior
- Maintaining Control Module Firmware
- Connecting Network Cables
- Removing a Control Module
- Installing a Control Module
- Replacing the Compact Flash Card
- 4 Maintaining Power Supply and Cooling Modules
- A Environmental, Power, and Other Specifications
- Index
PS3000 Series Hardware Maintenance Maintaining Power Supply/Cooling Modules
4–5
Figure 4-4: Using the Cable Strain Relief
Turn on power to the power supply and cooling module (press –). Initialization
generally can take from one to ten seconds. Completion is indicated by the green
power LED and event log messages stating that fans have returned to their normal
speed.
To ensure that the new module is operational, check that there are no red LEDs.
Also, check the GUI Member Enclosure window or invoke the CLI
member
select show enclosure
command.