Users Guide

Group Name Monitor Type Description Default Periodic Poll Setting
Unit monitor Polls the health status of the
Volumes group at regular
intervals.
3700 seconds
Dell EqualLogic Storage Pool
Group
Unit monitor Polls the health status of Storage
Pool(s) group at regular intervals.
3700 seconds
EqualLogic Helper Utility Unit monitor Rolls up the version information
of Dell EqualLogic helper utility.
3700 seconds
Monitors enabled by the EqualLogic Detailed Feature
Dell EqualLogic Storage Pool
Group
Dependency rollup Rolls up the health status of
Storage Pool(s) to the Storage
Pools group.
Not applicable
Dell EqualLogic Controller
Group
Unit monitor Polls the health status of
Controllers at regular intervals.
3700 seconds
Dell EqualLogic Ethernet
Interfaces Group
Unit monitor Polls the health status of
Ethernet interfaces at regular
intervals.
3700 seconds
Unit monitor (event-based) Computes the health status of
Ethernet interfaces when a link
up or link down event is received.
Not applicable
Dell EqualLogic Power
Supply Group
Unit monitor Polls the health status of power
supplies at regular intervals.
3700 seconds
Dell EqualLogic Storage Pool Dependency rollup Rolls up the health status of the
members to the Storage Pool.
Not applicable
Dell EqualLogic Member Unit monitor Polls the health status of the
members at regular intervals.
3700 seconds
Dell EqualLogic Disk Group Unit monitor Polls the health status of the
physical disks at regular intervals.
3700 seconds
Dell EqualLogic Member
Sensors Group
Unit monitor Polls the health status of the
sensors at regular intervals.
3700 seconds
Object Discoveries
You can customize the following Dell EqualLogic Storage Management Pack discovery parameters, using the following overrides:
• Enabled — Allows you to enable or disable discoveries. You can set the Override Setting to be True or False.
• Interval in Seconds — The frequency (in seconds) with which the Dell Management Pack discovers the component instance and
attributes of your Dell device. The default value for this attribute is 86399 seconds (24 hours).
• SNMP Query Timeout in Seconds — The time specified for the SNMP stack to wait till the same request is retried. The default
setting is 4 seconds.
• Number of SNMP Query Retries — The number of times the management pack retries polling in case of an SNMP timeout. The
default setting is 3.
Rules
There are 36 rules, which process SNMP traps from the EqualLogic device and display them as Dell EqualLogic alerts in the OpsMgr
Alerts View.
Using Dell EqualLogic Storage Management Pack Suite
13