Owner's Manual

Group Name Monitor Type Description Default Periodic Poll Setting
Dell EqualLogic Ethernet
Interfaces Group
Unit monitor Polls the health status of
Ethernet interfaces at
regular intervals.
3700 seconds
Unit monitor (event-based) Computes the health status
of Ethernet interfaces when
a link up or link down event
is received.
Not applicable
Dell EqualLogic Power
Supply Group
Unit monitor Polls the health status of
power supplies at regular
intervals.
3700 seconds
Dell EqualLogic Storage
Pool
Dependency rollup Rolls up the health status of
the members to the Storage
Pool.
Not applicable
Dell EqualLogic Member Unit monitor Polls the health status of the
members at regular intervals.
3700 seconds
Dell EqualLogic Disk
Group
Unit monitor Polls the health status of the
physical disks at regular
intervals.
3700 seconds
Dell EqualLogic Member
Sensors Group
Unit monitor Polls the health status of the
sensors at regular intervals.
3700 seconds
Object Discoveries
You can customize the following Dell EqualLogic Storage Management Pack discovery parameters, using the following
overrides:
• Enabled — Allows you to enable or disable discoveries. You can set the Override Setting to be True or False.
• Interval in Seconds — The frequency (in seconds) with which the Dell Management Pack discovers the
component instance and attributes of your Dell device. The default value for this attribute is 86399 seconds (24
hours).
• SNMP Query Timeout in Seconds — The time specified for the SNMP stack to wait till the same request is
retried. The default setting is 4 seconds.
• Number of SNMP Query Retries — The number of times the management pack retries polling in case of an
SNMP timeout. The default setting is 3.
Rules
There are 36 rules, which process SNMP traps from the EqualLogic device and display them as Dell EqualLogic Alerts in
the OpsMgr Alerts view.
The following table lists the Dell EqualLogic Alerts.
16