Owner's Manual

Issue 3 - DF504280: When a disk is removed from the EqualLogic member, a Disk Status Change Alert is generated with

the severity "Warning" and the event description indicates that the alert is not supported by the management pack.

Resolution (Optional)

Close the Disk Status Change Alert.

Versions Affected

All

Corrected Problems

The following problems were reported in earlier releases and have been corrected in this release:

•

EqualLogic PS Series arrays were not getting discovered on language versions other than English and Japanese.

(DF408728, DF414587)

•

Disk and volume health status were reported erroneously when the number of instances was more than 50.

(DF434581)

Global Support

For information on technical support, visit

www.dell.com/contactus

For information on documentation support, visit

support.dell.com/manuals.

On the

Manuals

page, click

Software

Systems Management

Click on the specific product on the right-side to access the documents.

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and EqualLogic™ are trademarks of Dell Inc. Microsoft®, Windows®, Windows Vista®,

Windows Server®, Windows Vista® and System Center Operations Manager are either trademarks or registered trademarks of Microsoft

Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products. Dell

Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

2011 – 09 Rev. A00