Owner's Manual

Dell EqualLogic Storage Management Pack Suite Operations 25
Object Discoveries
You can customize the following EqualLogic Management Pack discovery
parameters, using the overrides:
• Enabled — Allows you to enable or disable discoveries. You can set the
Override Setting to be True or False.
• Interval in Seconds — The frequency (in seconds) with which the Dell
Management Pack discovers the component instance and attributes of
your Dell device. The default value for this attribute is 86399 seconds
(24 hours).
•
SNMP Query Timeout in Seconds — The time specified for the SNMP
stack to wait till the same request is retried. The default setting is 4
seconds.
•
Number of SNMP Query Retries — The number of times the
management pack retries polling in case of an SNMP timeout. The default
setting is 3.
Power Supply
Group
Unit monitor Polls the health status of
power supplies at regular
intervals.
3700 seconds
Dell EqualLogic
Storage Pool
Dependency
rollup
Rolls up the health status of
the members to the Storage
Pool.
Not applicable
Dell EqualLogic
Member
Unit monitor Polls the health status of
the members at regular
intervals.
3700 seconds
Dell EqualLogic
Disk Group
Unit monitor Polls the health status of
the physical disks at regular
intervals.
3700 seconds
Dell EqualLogic
Member Sensors
Group
Unit monitor Polls the health status of
the sensors at regular
intervals.
3700 seconds
Table 2-3. Unit Monitors — Dell EqualLogic Storage Management Pack
(continued)
Group Name Monitor Type Description Default Periodic
Poll Setting
A5_bk0.book Page 25 Monday, September 26, 2011 4:40 PM