Owner's Manual

Dell EqualLogic Storage Management Pack Suite Operations 23
Unit Monitors
You can customize the following parameters of the EqualLogic Management
Pack unit monitors by using overrides:
• Enabled — Allows you to enable or disable monitors. You can set the
Override Setting to either True or False.
• Interval in Seconds — The frequency (in seconds) with which the
Management Pack polls the Dell device to check the health of a
component. The default setting for the interval in seconds is 3700
(62 minutes).
•
SNMP Timeout Intervals — The time specified for the SNMP Stack to
wait till the same request is retried. The default setting for the SNMP
timeout is 60 seconds.
•
SNMP Retries — The number of times the management pack retries
polling in case of an SNMP timeout. The default setting for the SNMP
retry is 5.
NOTE: For optimal perfomance, it is recommended that you specify the same value
for all unit monitors.
A5_bk0.book Page 23 Monday, September 26, 2011 4:40 PM