Owner's Manual

12 Dell EqualLogic Storage Management Pack Suite Operations
Discovery
The management pack discovers Dell EqualLogic devices present in the
Network Devices list of SCOM.
Discovering a Dell EqualLogic Device
To discover a Dell EqualLogic device:
1 Log on to the system with an account that has the SCOM Administrator
role for the Management Group.
2 Launch the Operations Console and click Administration .
3 Right-click on Network Devices and select Discovery Wizard from the
pop-up menu. The
Introduction screen appears.
4 Read the instructions and click Next.
5 On the Computer and Device Management Wizard menu, select
Network Devices , and click Next.
6 Ty p e the Start and End of the IP address range that you want to scan, the
SNMP community string, and select the SNMP version.
For discovery and monitoring of the Dell EqualLogic devices, the
supported SNMP version is SNMPv2.
NOTE: These steps may be different in SCOM 2007 SP1 and SCE 2007 SP1.
7 Set the Discovery Timeout and click Discover . The Discovery Progress
page is displayed.
8 On the Select Objects to Manage screen, select the devices you want to
manage and click
Next.
9 Click Finish .
NOTE: You must use only the EqualLogic group IP address to perform
discovery of the devices when the group does not have a management
network configured. When the device is configured for management mode,
use the EqualLogic management IP for discovering.
A5_bk0.book Page 12 Monday, September 26, 2011 4:40 PM