Owner's Manual

32 Dell EqualLogic Storage Management Pack Suite Operations
Customizing Rules
You can customize the Alert rules by setting override parameters for the
rules.
To customize the rules:
1
Click the Authoring tab in the Operations Console.
2 Select Rules under Management Pack Objects in the Authoring pane.
3 In the Rules pane, select a rule.
4 Right-click the rule and select the Overrides option.
5 Select Disable the Rule and any of the sub-options to disable the rule.
6 Select Override the Rule and any of the sub-options to set the override
parameters for the rule.
You can also change the Severity setting for the rule.
7 Click OK to apply the override parameter to your rule or Cancel to
cancel the changes.
Dell EqualLogic : Both the
Sumo Channel cards failed
Both the Sumo Channel cards
failed.
2 (Critical)
Dell EqualLogic : EqualLogic
Disk Status changes from one
state to another
The EqualLogic Disk Status has
changed from one state to
another.
0 (Informational)
Table 3-3. List of Supported EqualLogic SNMP Hardware Alerts
Alert Name Description Severity
A5_bk0.book Page 32 Wednesday, April 14, 2010 5:14 PM