Owner's Manual

Dell EqualLogic Storage Management Pack Suite Operations 25
Launching EqualLogic Console
You can launch the EqualLogic Console from the Actions pane of the SCOM
Console.
When you select an EqualLogic group in the Diagram view or State view, the
Launch EqualLogic Console task appears in the Actions pane under Dell
EqualLogic Member Group.
Click Launch EqualLogic Console to perform various functions on the
EqualLogic device.
Table 3-1. Severity Level Indicators
Icon Severity Level
Normal/OK. The component is working as expected.
Warning/Non-critical. A probe or other monitoring device has detected
a reading for the component that is above or below the acceptable level.
The component may still be functioning, but it could fail.
The component may also be functioning in an impaired state.
Critical/Failure/Error.The component has either failed or failure is
imminent. The component requires immediate attention and may need
replacement. Data loss may have occurred.
The health status is not applicable for the specific component.
A5_bk0.book Page 25 Wednesday, April 14, 2010 5:14 PM