Owner's Manual

14 Getting Started
Configuring Management Server Action Account with
Normal User Privileges
To configure Management Server Action account with normal user
privileges:
1
Install SCOM on the management station, with the Management Server
Action Account as a normal domain user.
2 Import the Dell Management Pack on the management station.
3 Rediscover the managed system with the EqualLogic PS Series Arrays
management pack.
NOTE: The discovery of the EqualLogic PS Series arrays depends on the
discovery cycle time.
Installing the Dell EqualLogic Storage
Management Pack Suite v4.0
Pre-Import tasks for the EqualLogic Management Pack
Before you import the EqualLogic Management Pack to SCOM:
1
Download the
Dell_EqualLogic_Storage_Management_Pack_Suite_v4.0_A00.msi file
from the Dell Support website at support.dell.com to the destination
directory on your local system.
2 Run the
Dell_EqualLogic_Storage_Management_Pack_Suite_v4.0_A00.msi file
from the folder where you extracted.
3 Follow the wizard to install the management pack.
4 Install the management pack to the default location C:\Dell Management
Packs\EqualLogic Storage Mgmt Suite\4.0.
NOTE: You can change the default location.
5 Ensure the DellEQLHelper.dll is installed in the Library folder.
The default location is
C:\Dell Management Packs\EqualLogic Storage
Mgmt Suite\4.0\Library.
The installer registers the DellEQLHelper.dll on the Windows server.
A5_bk0.book Page 14 Wednesday, April 14, 2010 5:14 PM