Install Guide

Storage relative
humidity
5% to 95% with a maximum humidity gradation of 10% per hour at a maximum wet
bulb temperature of 38°C (100°F)
Maximum operational
vibration
0.26 Grms (5 Hz – 350 Hz @ 0.0002G2/Hz) in operational orientation for 5 minutes
Maximum storage
vibration
1.88 Grms with the following PSD profile (all 6 sides tested for 15 minutes each side)
Frequency (Hz) G2/Hz
10 0.13
20 0.13
70 0.004
130 0.004
165 0.0018
500 0.0018
Maximum operational
shock
31G half-sine shock +/-5% with pulse duration of 2.6 ms +/-10% in the operational
orientation
Maximum storage
shock
Square wave shock of 27G, at 235 inches/second (596.90 cm/second) velocity
change (all six sides tested)
Operating altitude
-15.2 mto 3048 m (-50 to 10,000 feet)
For altitudes above 2950 feet, the maximum operating temperature is derated 1°F/550
feet.
Storage altitude –15.2 m to 10,668 m (–50 ft to 35,000 ft)
Airborne Contaminant
Level Class
G1 as defined by ISA-S71.04-1985
Shipping Box Contents
Unpack the EqualLogic FS7600. After unpacking, place the appliance on a sturdy surface that is protected from
electrostatic discharge.
Make sure you have all the items supplied in the shipping box, described in Table 3.
Table 3: Shipping Box Contents
Part Description
One FS7600 NAS appliance Provides high availability and processing power for the NAS cluster.
Bezel Protects the front of the appliance.
Two power cables
The cables included vary based on region. The connectors on the power cables
vary depending on your country.
If power cables are not in the shipping box, contact your PS Series support
provider or reseller for power cable information.
Serial debug cable Enables you to connect to the appliance for troubleshooting.
Rail kit For mounting the appliance in a standard rack.
Documentation
The following documentation is included in the shipping box:
Hardware setup poster
Installation and Setup Guide (this document)
License, regulatory, and warranty information
6
Dell EqualLogic FS7600 Installation and Setup Guide 1 Before You Begin