Deployment Guide

54 Leaf-Spine Deployment and Best Practices Guide | Version 1.0
Delay-Restore timer: 90 seconds
Delay-Restore Abort Threshold: 60 seconds
Peer-Routing : Disabled
Peer-Routing-Timeout timer: 0 seconds
Multicast peer-routing timeout: 150 seconds
L2-Leaf1-S4048#show vlt brief
VLT Domain Brief
------------------
Domain ID: 127
Role: Primary
Role Priority: 32768
ICL Link Status: Up
HeartBeat Status: Up
VLT Peer Status: Up
Local Unit Id: 0
Version: 6(7)
Local System MAC address: f4:8e:38:20:c5:29
Remote System MAC address: 64:00:6a:e6:cc:14
Remote system version: 6(7)
Delay-Restore timer: 90 seconds
Delay-Restore Abort Threshold: 60 seconds
Peer-Routing : Disabled
Peer-Routing-Timeout timer: 0 seconds
Multicast peer-routing timeout: 150 seconds
9.3.2 show vlt detail
This command shows the status and active VLANs of all VLT LAGs (Port channels 1 and 2 in this example).
The local and peer status must both be up.
L2-Spine1-S6010#show vlt detail
Local LAG Id Peer LAG Id Local Status Peer Status Active VLANs
------------ ----------- ------------ ----------- -------------
1 1 UP UP 1, 10, 20
2 2 UP UP 1, 10, 20
L2-Leaf1-S4048#show vlt detail
Local LAG Id Peer LAG Id Local Status Peer Status Active VLANs
------------ ----------- ------------ ----------- -------------
1 1 UP UP 1, 10, 20
9.3.3 show vlt mismatch
This command highlights configuration issues between VLT peers. Mismatch examples include incompatible
VLT configuration settings, VLAN differences, different switch operating system versions and spanning-tree
inconsistencies. There should be no output to this command on any switch configured for VLT. If there is,
resolve the mismatch.