Deployment Guide

49 Leaf-Spine Deployment and Best Practices Guide | Version 1.0
L2-Leaf1-S4048
L2-Leaf2-S4048
vlt domain 127
peer-link port-channel 127
back-up destination 100.67.194.2
unit-id 0
vlt domain 127
peer-link port-channel 127
back-up destination 100.67.194.1
unit-id 1
Interface Te 1/48 connects downstream to Server 1 and is configured as an RSTP edge port. Interfaces Fo
1/51 and Fo 1/53 connect to the spines upstream and are configured in LACP port channel 1. The port
channel is configured for VLT.
L2-Leaf1-S4048
L2-Leaf2-S4048
interface TenGigabitEthernet 1/48
description Server 1
no ip address
portmode hybrid
switchport
spanning-tree rstp edge-port
no shutdown
interface fortyGigE 1/51
description Spine1-Port25
no ip address
port-channel-protocol LACP
port-channel 1 mode active
no shutdown
interface fortyGigE 1/53
description Spine2-Port25
no ip address
port-channel-protocol LACP
port-channel 1 mode active
no shutdown
interface Port-channel 1
description To Spines
no ip address
portmode hybrid
switchport
vlt-peer-lag port-channel 1
no shutdown
interface TenGigabitEthernet 1/48
description Server 1
no ip address
portmode hybrid
switchport
spanning-tree rstp edge-port
no shutdown
interface fortyGigE 1/51
description Spine1-Port26
no ip address
port-channel-protocol LACP
port-channel 1 mode active
no shutdown
interface fortyGigE 1/53
description Spine2-Port26
no ip address
port-channel-protocol LACP
port-channel 1 mode active
no shutdown
interface Port-channel 1
description To Spines
no ip address
portmode hybrid
switchport
vlt-peer-lag port-channel 1
no shutdown
VLANs 10 and 20 are configured on each switch. Port-channel 1 is tagged in both VLANs.
Note: The shutdown/no shutdown commands on a VLAN have no effect unless the VLAN is assigned
an IP address (configured as an SVI).
L2-Leaf1-S4048
L2-Leaf2-S4048
interface Vlan 10
no ip address
tagged TenGigabitEthernet 1/48
tagged Port-channel 1
interface Vlan 10
no ip address
tagged TenGigabitEthernet 1/48
tagged Port-channel 1