White Papers

Power Supply Profile
20 Version 1.0.0a
Table 7 – CIM_RedundancySet.Failover( ) Method: Parameters
Qualifiers Name Type Description/Values
IN, REQ FailoverFrom
CIM_ManagedElement
REF
The redundant element that will become
inactive
IN, REQ FailoverTo
CIM_ManagedElement
REF
The redundant element that will become
active and take over the inactivated element
8.3 Profile Conventions for Operations
Support for operations for each profile class (including associations) is specified in the following
subclauses. Each subclause includes either the statement “All operations in the default list in section 8.3
are supported as described by DSP0200 version 1.2” or a table listing all of the operations that are not
supported by this profile or where the profile requires behavior other than that described by DSP0200.
The default list of operations is as follows:
• GetInstance
• EnumerateInstances
• EnumerateInstanceNames
• Associators
• AssociatorNames
• References
• ReferenceNames
A compliant implementation shall support all of the operations in the default list for each class, unless the
“Requirement” column states something other than Mandatory.
8.4 CIM_ElementCapabilities Operations
Table 8 lists operations that either have special requirements beyond those from DSP0200, or shall not
be supported.
Table 8 – CIM_ElementCapabilities Operations
Operation Requirement Messages
EnumerateInstances Unspecified None
EnumerateInstanceNames Unspecified None
Associators Unspecified None
AssociatorNames Unspecified None
References Unspecified None
ReferenceNames Unspecified None