White Papers

16 Dell Confidential Version 1.0.0
Table 13 – DCIM_OSDeploymentService. DetachISOImage() Method: Return Code Values
Value Description
0 Request was successfully executed.
1 Method is unsupported.
2 Error occurred.
Table 14 – DCIM_OSDeploymentService. DetachISOImage() Method: Parameters
Qualifiers Name Type Description/Values
OUT
(optional)
MessageID String
Error MessageID is returned If the method
fails to execute.
OUT
(optional)
Message String
Error Message in English corresponding to
MessageID is returned If the method fails to
execute.
8.7 Method: DCIM_OSDeploymentService.BootToPXE()
The BootToPXE() method is used to boot the server using the PXE mechanism.
Return values for BootToPXE () shall be as specified in Table 10, where the method-execution behavior
matches the return-code description. No standard messages are defined for this method.
Table 15 – DCIM_OSDeploymentService. BootToPXE() Method: Return Code Values
Value Description
0 Request was successfully executed.
1 Method is not supported in the implementation.
2 Error occurred.
4096
Job started: REF returned to started
CIM_ConcreteJob
Table 16 – DCIM_OSDeploymentService. BootToPXE() Method: Parameters
Qualifiers Name Type Description/Values
OUT
(optional)
MessageID String
Error MessageID is returned If the method
fails to execute.
OUT
(optional)
Message String
Error Message in English corresponding to
MessageID is returned If the method fails to
execute.
8.8 Profile Conventions for Operations
Support for operations for each profile class (including associations) is specified in the following
subclauses. Each subclause includes either the statement “All operations in the default list in section 0
are supported as described by DSP0200 version 1.2,” or a table listing all of the operations that are not
supported by this profile or where the profile requires behavior other than that described by DSP0200.