White Papers

20 Version 1.2.0
Table 27 – DCIM_OSDeploymentService.DisconnectNetworkISOImage () Method: Return Code
Values
Value
Description
0
Request was successfully executed.
1
Method is not supported in the implementation.
2
Error occurred.
Table 28 – DCIM_OSDeploymentService.DisconnectNetworkISOImage () Method: Parameters
Qualifiers
Name
Type
Description/Values
OUT
(optional)
MessageID
String
If the method fails to execute, the error
message ID is returned.
OUT
(optional)
Message
String
If the method fails to execute, the error
message in English is returned.
OUT
(optional)
MessageArguments
string[]
Substitution variables for dynamic error
messages
8.14 Method:
DCIM_OSDeploymentService.GetNetworkISOImageConnectionInfo()
This method will give the status of the ISO Image that has been exposed to host
Return values for GetNetworkISOImageConnectionInfo () shall be as specified in Table 29 where the
method-execution behavior matches the return-code description. GetNetworkISOImageConnectionInfo()
method’s parameters are specified in Table 30.
Table 29 – DCIM_OSDeploymentService.GetNetworkISOImageConnectionInfo() Method: Return
Code Values
Value
Description
0
Request was successfully executed.
1
Method is not supported in the implementation.
2
Error occurred.