White Papers

30 Version 1.3.0
 GroupID property shall be “SerialCommSettings”.
324
 GroupDisplayName property shall be “Serial Communication”.
325
The following table describes the values for the DCIM_BIOSEnumeration of this group. The column
326
headers represent the properties of the DCIM_BIOSEnumeration class. Each of the cells represent the
327
values of the properties. Each of the listed values under the PossibleValues header is an element of an
328
array.
329
Table 18 – DCIM_BIOSEnumeration Serial Communication
330
AttributeName
AttributeDisplayName
IsReadOnly
Display
Order
PossibleValues
SerialComm
Serial
Communication
FALSE
1001
 OnNoConRedir
 OnConRedirCom1
 OnConRedirCom2
 Off
SerialPortAddress
Serial Port Address
FALSE
1003
 Serial1Com1Serial2Com2
 Serial1Com2Serial2Com1
ExtSerialConnector
External Serial
Connector
FALSE
1005
 Serial1
 Serial2
 RemoteAccDevice
FailSafeBaud
Failsafe Baud Rate
FALSE
1007
 115200
 57600
 19200
 9600
ConTermType
Remote Terminal
Type
FALSE
1009
 Vt100Vt220
 Ansi
RedirAfterBoot
Redirection After
Boot
FALSE
1011
 Enabled
 Disabled
331
332
7.1.5.6 System Profile Settings
333
This section describes the attributes for System Profile Settings configuration.
334
For the DCIM_BIOSEnumeration:
335
 GroupID property shall be “SysProfileSettings”.
336
 GroupDisplayName property shall be “System Profile Settings”.
337
The following table describes the values for the DCIM_BIOSEnumeration of this group. The column
338
headers represent the properties of the DCIM_BIOSEnumeration class. Each of the cells represent the
339
values of the properties. Each of the listed values under the PossibleValues header is an element of an
340
array.
341