White Papers

22 Version 1.3.0
Properties
Type
Requirements
Additional Requirements
PasswordState
Uint16
Mandatory
The property shall represent the current state of
the password that the attribute represents.
The property shall have one of the following
values:
 0 (Unknown) password state is not
available,
 2 (Installed) password is currently set or
installed,
 3 (Uninstalled) password is currently not
set or is uninstalled,
 4(Hardware Disabled) password is
disabled by hardware jumper.
7.1.5 BIOS Attributes
253
This section lists and describes the attributes and their logical grouping. For changes in attributes from
254
the BIOS and Boot Management Profile version 1.1 please refer to the ANNEX A.
255
NOTE: The BIOS attributes listed in this section may not be applicable for all Dell systems. A particular attribute is
256
applicable based on the model of a Dell system, the features available in the system and the BIOS version of the
257
system.
258
7.1.5.1 Processor Settings
259
This section describes the attributes for Processor Settings configuration.
260
For the DCIM_BIOSEnumeration, DCIM_BIOSString, and DCIM_BIOSInteger:
261
 GroupID property shall be “ProcSettings”
262
 GroupDisplayName property shall be “Processor Settings”
263
The following table provides the values for the DCIM_BIOSEnumeration class of this group.The column
264
headers represent the properties of the DCIM_BIOSEnumeration class. Each of the cells represent the
265
values of the properties. Each of the listed values under the PossibleValues header is an element of an
266
array.
267
268