Developers Guide

Preparing MD3 volumes for import
39 Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import | 3041-BP-EM
7. Once the connection has been established, on the displayed confirmation window, click OK.
8. The remote connection to the MD3 array is displayed in the Remote Connections tab.
9. The SC Series array is now remotely connected to the MD3 array.
10. Right-click the fault domain that was used to create the connection to the MD3 array, and select
Rediscover iSCSI Remote Connections.
Note: When importing from an FC-connected MD3 array, step 10 is not required. Volumes that were mapped
to the SC Series server host object on the MD3 array will automatically appear in the External Devices
subtree.
11. Any volumes that were mapped to the SC Series host object on the MD3 array will now appear under
the External Devices subtree.
4.5 Establishing an SC Series remote Fibre Channel connection to an
MD3 array
Note: The physical Fibre Channel ports on the SC Series array should be zoned to both controllers of the
MD3 array. If the SC Series array is only zoned to one of MD3 controllers, only those volumes owned by that
controller will be visible to the SC Series array. Volumes on the other MD3 controller will not be visible to the
SC Series array.
Effectively, when the SC Series and MD3 arrays are zoned together, a remote connection has already been
established between the two arrays.