Deployment Guide

32 VxRail Networking Guide with Dell EMC S4148-ON Switches | version 1.0
5.2 Dual-switch example
The running configuration example below is seen on the console from the show running-config
command. Portions of the configuration have been removed that are repetitive or are not applicable to
deployment of VxRail.
Switch-1 (S4148-ON)
Switch-2 (S4148-ON)
Global switch settings
hostname Switch-1
snmp-server community name ro
ntp server 100.67.10.20
spanning-tree mode rstp
ip igmp snooping
hostname Switch-2
snmp-server community name ro
ntp server 100.67.10.20
spanning-tree mode rstp
ip igmp snooping
Management configuration
interface mgmt 1/1/1
no ip address dhcp
ip address 100.67.171.35/24
no shutdown
management route 0.0.0.0/0 100.67.171.254
interface mgmt 1/1/1
no ip address dhcp
ip address 100.67.171.34/24
no shutdown
management route 0.0.0.0/0 100.67.171.254
VLT Configuration
interface ethernet1/1/29
description VLTi
no shutdown
no switchport
!
interface ethernet1/1/30
description VLTi
no shutdown
no switchport
!
vlt-domain 127
backup destination 100.67.171.34
discovery-interface ethernet1/1/29-1/1/30
interface ethernet1/1/29
description VLTi
no shutdown
no switchport
!
interface ethernet1/1/30
description VLTi
no shutdown
no switchport
!
vlt-domain 127
backup destination 100.67.171.35
discovery-interface ethernet1/1/29-1/1/30
VLAN configurations
interface vlan1
description Management
no ip address
no shutdown
!
interface vlan110
description vMotion
no shutdown
!
interface vlan120
description VSAN
interface vlan1
description Management
no ip address
no shutdown
!
interface vlan110
description vMotion
no shutdown
!
interface vlan120
description VSAN