Deployment Guide

18 VxRail Networking Guide with Dell EMC S4148-ON Switches | version 1.0
4 Switch configuration
You will now configure the switch or switches using the parameters and values chosen and recorded in the
Appendix A and Appendix B worksheets. Power-on the switch and connect the laptop's serial cable to the
S4148-ON console port. No passwords or login accounts required for console access in factory default
configuration. Table 1 provides overall values used to validate the environment and for example values.
Overview of values used as examples in this document.
Single Switch
Example
Dual Switch
Example
(Switch-1)
Dual Switch
Example
Switch-2
Top of
Rack
Switch
Vendor
Dell EMC
Dell EMC
Dell EMC
Model
S4148-ON
S4148-ON
S4148-ON
Number of switches
1
2
2
Switch Ports Used (4
nodes)
1,2,3,4,5,6,7,8
1,3,5,7
1,3,5,7
NTP server
100.67.10.20
100.67.10.20
100.67.10.20
Hostname
Switch-1
Switch-1
Switch-2
Management IP/ Mask
100.67.171.34/24
100.67.171.35/24
100.67.171.34/24
Management route
100.67.171.254
100.67.171.254
100.67.171.254
spanning-tree
rstp
rstp
rstp
telnet server
No
No
No
ssh server
Yes
Yes
Yes
snmp-server
Yes
Yes
Yes
IGMP snooping
((VxRail 4.0 and earlier)
Yes
Yes
Yes
S4148 uplink ports to
Z9100
25,26
25,26
25,26
Appliance
Settings
Management VLAN Name
Management
Management
Management
Management VLAN ID
1
1
1
VSAN VLAN Name
vSAN
vSAN
vSAN
VSAN VLAN ID
120
120
120
vMotion VLAN Name
vMotion
vMotion
vMotion
vMotion VLAN ID
110
110
110
VM Network 1 VLAN Name
VM_Network_A
VM_Network_A
VM_Network_A
VM Network 1 VLAN ID
130
130
130
Uplink
Settings
Number of Switches
1
2
2
Speed
100GbE
100GbE
100GbE
Z9100 ports to the S4148
29,30
29,30
29,30
VLAN(s)
1,110,130
1,110,130
1,110,130