White Papers

http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/DCIM_PhysicalDiskView?__cimnamespace=root/dcim
The instance information of all available physical disks will be returned
9.6 Apply pending values for a particular RAID configuration
A) To invoke the CreateTargetedConfigJob() method, construct input parameters per Table 39
and use the RAID FQDD from section Error! Reference source not found.
B) INVOKE CreateTargetedConfigJob() method
Class URI:
http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_RAIDService?SystemCreationClassName=DCIM_ComputerS
ystem+CreationClassName=DCIM_RAIDService+SystemName=DCIM:ComputerSystem
+Name=DCIM:RAIDService
C) Allow several minutes for the UEFI to execute the SSIB task, which will be followed by a
reboot of the system
D) Query the status of the jobID output using the job control profile methods
9.7 Delete pending values for a particular RAID configuration
A) To invoke the DeletePendingConfiguration() method, construct input parameters per Table
42 and use the RAID FQDD from section Error! Reference source not found.
B) INVOKE DeletePendingConfiguration() method
Class URI:
http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_RAIDService?SystemCreationClassName=DCIM_ComputerS
ystem+CreationClassName=DCIM_RAIDService+SystemName=DCIM:ComputerSystem
+Name=DCIM:RAIDService
C) If the return parameters indicate success, per Table 40, no further action necessary
9.8 Clear old configuration from newly added hard drives
A) To invoke the ClearForeignConfig() method, construct input parameters per Table 10 and
use the particular RAID‟s FQDD
B) INVOKE ClearForeignConfig( ) method
Class URI:
http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_RAIDService?SystemCreationClassName=DCIM_ComputerS
ystem+CreationClassName=DCIM_RAIDService+SystemName=DCIM:ComputerSystem
+Name=DCIM:RAIDService
C) If return message indicates success per Table 8, no further action necessary