White Papers

Active Directory® Client Profile
14 Version 2.0.0a
Table 4 – DCIM_OEMActiveDirectoryService.RequestStateChange( ) Method: Parameters
Qualifiers Name Type Description/Values
IN, REQ RequestedState uint16
Valid state values:
2 (Enabled)
3 (Disabled)
OUT Job CIM_ConcreteJob REF Returned if job started
IN, REQ TimeoutPeriod Datetime
Client specified maximum amount of time a
transition to a new state should take:
0 or NULL – No time requirements
<interval> – Maximum time allowed
When Active Directory client state management is supported, RequestStateChange( ) method shall be
implemented and shall not return a value of 1 (Not Supported). See section 7.4.1.
Invoking the DCIM_OEMActiveDirectoryService.RequestStateChange(
) method multiple times could
ing overwritten or lost.
for this method.
profile class (including associations) is specified in the following
es either the statement “All operations in the default list in section 0
d by DSP0200 version 1.2” or a table listing all of the operations that are not
e the profile requires behavior other than that described by DSP0200.
•
• AssociatorNames
• References
ames
n shall su he operatio he default list for each class, unless the
“Re es somethin Manda
result in earlier requests be
No standard messages are defined
8.2 Profile Conventions for Operations
Support for operations for each
subclauses. Each subclause includ
are supported as describe
supported by this profile or wher
The default list of operations is as follows:
• GetInstance
• EnumerateInstances
EnumerateInstanceNames
• Associators
• ReferenceN
A compliant implementatio
mn stat
pport all of t ns in t
quirement” colu g other than tory.