White Papers

60 Version 1.3.0
Table 100 – DCIM_iDRACCardEnumeration USB Configuration
1325
AttributeName
AttributeDisplayName
IsReadOnly
DisplayOrder
PossibleValues
USBConfiguration
USB Configuration
False
2201
Disabled (0) –
iDRAC does not
perform
configuration.
Enabled with default
credentials(1) —
BIOS setup
password and
IDRAC user
accounts must be at
default.
Enabled (2) —
iDRAC performs
configuration once.
Values= {“0”,”1”,”2”}
[4] Note:
1. Default value is
Enabled.
2. After Import
from USB key this
Attribute will be
“Disabled” unless
explicitly set in the
Configuration XML
to “Enabled”
1326
1327
7.6 DCIM_iDRACCardService – iDRAC CardService
1328
This section describes the implementation for the DCIM_iDRACCardService class. It is used to host the
1329
ApplyAttributes method which is used to change the values of the iDRAC Card attribute values.
1330
7.6.1 Resource URIs for WinRM
®
1331
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-
1332
schema/2/DCIM_iDRACCardService?__cimnamespace=root/dcim”
1333
The key properties shall be SystemCreationClassName, CreationClassName, SystemName and Name.
1334
The instance Resource URI for DCIM_iDRACCardService instance shall be:
1335
“http://schemas.dell.com/wbem/wscim/1/cim-
1336
schema/2/DCIM_iDRACCardService?__cimnamespace=root/dcim+ SystemCreationClassName=
1337
DCIM_ComputerSyste +CreationClassName= DCIM_iDRACCardServcie + SystemName= DCIM:ComputerSystem
1338
+Name= DCIM:iDRACCardService”
1339
The following table lists the implemented operations on DCIM_iDRACCardService.
1340