White Papers

337 7.1.2 Operations
338 The following table lists the implemented operations on DCIM_FCView.
339
Table 4 – DCIM_FCView - Operations
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
340 7.1.3 Class Properties
341 The following table details the implemented properties for DCIM_FCView instance representing a FC
342 HBA in a system. The “Requirements” column shall denote whether the property is implemented (for
343 requirement definitions, see section 3). The “Additional Requirements” column shall denote either
344 possible values for the property, or requirements on the value formulation.
345
Table 5 – DCIM_FCView - Properties
Property Name
Requirement
Type
Requirement and description
InstanceID
Mandatory
String
The property value shall be the
FQDD property value.
FQDD
Mandatory
String
A string containing the Fully
Qualified Device Description, a
user-friendly name for the object.
DeviceDescription
Mandatory
String
A string containing the friendly
Fully Qualified Device
Description,a property that
describes the device and its
location
Bus
Mandatory
Uint32
This property represents the bus
number of the PCI device.
ChipType
Optional
String
This property represents the chip
type.
Device
Mandatory
Uint32
This property represents the device
number of the PCI device
DeviceName
Mandatory
String
This property represents FC HBA
device name.
EFIVersion
Mandatory
String
This property represents the
firmware version on the device.
FabricLoginRetryCount
Mandatory
Uint32
This property represents the Fabric
Login Retry Count
FabricLoginTimeout
Optional
Uint32
This property represents the Fabric
Login Timeout in miliseconds.
FCTapeEnable
Mandatory
Uint8
This property represents the FC
Tape Enable state.
0 - Unknown
2 – Enabled
3 – Disabled
FamilyVersion
Mandatory
String
This property represents the
firmware version.
FirstFCTargetWWPN
Mandatory
String
This property represents the First
FC Target World Wide Port Name.