White Papers

12 Version 1.0.2
Table 4 – Class: DCIM_BIOSEnumeration
Properties Notes Additional Requirements
InstanceID Mandatory
The property value shall be formed as follows:
“BIOS.Setup.1-1:<AttributeName property value>”.
AttributeName Mandatory
The property value shall be from the “AttributeName”
column in
Table 5
CurrentValue Mandatory
The property value shall be one of the values in the
“PossibleValues” column at the corresponding row in
Table 5.
PendingValue Mandatory
The property value shall be one of the values in the
“PossibleValues” column at the corresponding row in
Table 5.
IsReadOnly Mandatory
The property value shall be the value in the “IsReadOnly”
column at the corresponding row in
Table 5.
FQDD Mandatory
The property shall be set to “BIOS.Setup.1-1”.
PossibleValues Mandatory
The property value shall be equal to the array of the
values in “PossibleValues” column at the corresponding
row in
Table 5.
The following table describes the requirements for the AttributeName, and PossibleValues properties.
The PossibleValues is an array property represented in the table as comma delimited list.
NOTE: The BIOS attributes listed below may not be present on all Dell systems. The presence of a particular
attribute depends on the model of a Dell system, the features available in the system and the BIOS version of the
system.
Table 5 – DCIM_BIOSEnumeration Attributes
AttributeName Attribute Description IsReadOnly PossibleValues
MemTest
When set to enabled, the
memory tests are
performed
FALSE Enabled, Disabled
RedundantMem
Feature
Dependant
1
Disabled, Spare, Mirror,
IntraNodeMirror, DimmSpare
MemOpMode
Memory operating mode
Feature
Dependant
1
OptimizerMode, AdvEccMode,
SpareMode, MirrorMode
MemOptimizer
Memory Optimizer
Technology
Feature
Dependant
1
Enabled, Disabled
SnoopFilter
Snoop Filter FALSE Enabled, Disabled
NodeInterleave
If the system is configured
with matching memory,
this field enables node
interleaving. If set to
Disabled (the default), the
system supports Non-
Uniform Memory
architecture (NUMA)
(asymmetric) memory
configurations. This field is
active only if the memory
configuration can support
node interleaving.
Feature
Dependant
1
Enabled, Disabled