White Papers

44 Version 1.0.0a
Figure 5 – Monolithic System – Pre-configured SAPs - Connect
The Virtual Media Service is represented by usbredirectsvc1. The USB Redirection SAP is represented
by usbredirectsap1.
The instance of CIM_USBRedirectionCapabilities, usbredirectcap1, describes the capabilities of the
Virtual Media Service. The SAPCapabilitiesSupported property value of 2 (Pre-configured SAPs)
determines that at least one static pre-configured Virtual MediaSAP exists. The absence of the property
value 3 (Create SAPs) determines that additional SAPs cannot be created. The state of the pre-
configured USB Redirection SAPs can be managed, but new Virtual Medias cannot be created. The
SAPCapabilitiesSupported property value of 4 (Modify SAP) determines that the SAP properties can be
modified.
The ConnectionModesSupported property determines that the Virtual Media Service only supports “listen”
mode. The USBVersionsSupported and ClassesSupported properties determine that the Emulated USB
Devices being redirected are emulated as a USB 2.0 MSD (Media Storage Device).
The InfoFormatsSupported property determines that the SAP can support URLs to initiate the redirected
session connection to the remote SAP.
The CIM_ServiceAccessBySAP association between usbredirectsvc1 and usbredirectsap1 determines
that the usbredirectsvc1 is available at usbredirectsap1. The USBRedirectionSAP.ConnectionMode
property is set to "connect" which determines that the SAP will initiate a session to a remote SAP. The
instance of CIM_RemoteServiceAccessPoint, remotesap1, has been configured with the access
information needed to initiate a session with the remote SAP.