White Papers

24 Version 1.0.0a
When the RequestedState parameter has a value of 2 (Enabled) or 3 (Disabled) or 6 (Offline) and the
DCIM_OEMVirtualMediaService.RequestStateChange(
) method completes successfully, the value of the
EnabledState property shall equal the value of the DCIM_OEMVirtualMediaService.RequestedState
property.
If the method does not complete successfully, the value of the EnabledState property is indeterminate.
7.8.2 Virtual Media Service State Management Is Not Supported
This section describes the CIM elements and behaviors that shall be implemented when management of
the Virtual Media Service state is not supported.
7.8.2.1 CIM_USBRedirectionCapabilities
Whe
n state management is not supported, an instance of CIM_USBRedirectionCapabilities may be
associated with the DCIM_OEMVirtualMediaService instance through an instance of
CIM_ElementCapabilities. The existence of the CIM_ElementCapabilities instance is conditional on the
existence of the CIM_USBRedirectionCapabilities instance.
The CIM_ElementCapabilities association's ManagedElement property shall reference the
DCIM_OEMVirtualMediaService instance, and its Dependent property shall reference the
CIM_USBRedirectionCapabilities instance.
7.8.2.1.1 CIM_USBRedirectionCapabilities.RequestedStatesSupported
The CIM_US
BRedirectionCapabilities.RequestedStatesSupported property shall not contain any values.
7.8.2.2 DCIM_OEMVirtualMediaService.RequestedState
The Re
questedState property shall have the value of 12 (Not Applicable).
7.8.2.3 DCIM_OEMVirtualMediaService.EnabledState
The Enabl
edState property shall have one of the following values: 2 (Enabled), 3 (Disabled), or 0
(Unknown). The value 5 (Not Applicable) may be set when non-CIM instrumentation has manipulated the
instance of DCIM_OEMVirtualMediaService.
7.9 State Management of a USB Redirection SAP
The following sections describe the CIM elements and behaviors that allow the client to determine
whether state management of the USB Redirection SAP is supported.
Support for managing the state of a USB Redirection SAP is optional behavior. The following sections
describe the CIM elements and behaviors that allow the client to determine whether state management of
the USB Redirection SAP is supported.
7.9.1 USB Redirection SAP State Management Is Supported -- Conditional
This section describes the CIM elements and behaviors that shall be implemented when state
management of the USB Redirection SAP is supported.
7.9.1.1 CIM_EnabledLogicalElementCapabilities
Whe
n state management of the USB Redirection SAP is supported, exactly one instance of CIM_
EnabledLogicalElementCapabilities shall be associated with the instance of CIM_USBRedirectionSAP
through an instance of CIM_ElementCapabilities.