White Papers

Version 1.1.0 11
MaxDIMMSlots
Mandatory
uint32
The number of slots or sockets available for
memory devices in the system memory array.
PopulatedDIMMSlots
Mandatory
uint32
System memory sockets current capacity.
MaxCPUSockets
Mandatory
uint32
Maximum CPU sockets in the system.
PopulatedCPUSockets
Mandatory
uint32
Populated CPU sockets in the system.
MaxPCIeSlots
Mandatory
uint32
Maximum PCIe slots in the system.
PopulatedPCIeSlots
Mandatory
uint32
Populated PCIe slots in the system.
AssetTag
Mandatory
string
Asset tag of the system.
SystemRevision
Mandatory
uint16
System Revision describes whether the
platform was the first or second revision of the
corresponding model. The revisions are
usually correlated with an upgrade of the CPU
model in the same platform model.
BIOSVersionString
Mandatory
string
System BIOS version.
BIOSReleaseDate
Mandatory
string
String number of the BIOS release date. The
date string, if supplied, is in mm/dd/yyyy
format.
SysMemTotalSize
Mandatory
uint32
The property shall be in Mbytes. The
maximum memory capacity in MB.
SysMemPrimaryStatus
Mandatory
uint32
SystemMemoryPrimaryStatus provides a high
level status value, intended to align with Red-
Yellow-Green type representation of status for
the system memory.
SysMemLocation
Mandatory
uint16
The physical location of the memory array,
whether on the system board or an add-in
board.
SysMemErrorMethodology
Mandatory
uint16
The primary hardware error correction or
detection method supported by the system’s
memory array.
SysMemFailOverState
Mandatory
string
System memory fail over state.
MemoryOperationMode
Mandatory
string
System memory operation mode. Denotes the
mode of operation for system memory such
as mirrored, advanced ECC, optimized mode.
LastSystemInventoryTime
Mandatory
string
This property provides the last time \"System
\"Inventory Collection On Reboot(CSIOR)\"
was performed. The value is represented as
yyyymmddHHMMSS.
LastUpdateTime
Mandatory
string
This property provides the last time the data
was updated. The value is represented as
yyyymmddHHMMSS
7.2 System Info Profile Profile Registration
This section describes the implementation for the DCIM_LCRegisteredProfile class.
This class shall be instantiated in the Interop Namespace.
The DCIM_ElementConformsToProfile association(s) shall reference the DCIM_LCRegisteredProfile
instance.
7.2.1 WBEM URIs for WinRM
®
The class WBEM URI shall be "http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/CIM_RegisteredProfile?__cimnamespace=<Interop Namespace>"
The key property shall be the InstanceID property.