White Papers

Power Utilization Management Profile
Version 1.0.0a 41
"Pending\") or IsCurrent property with value 1(\"Is Current\"). "
"The associated DCIM_OEMPowerUtilizationSettingData properties "
"shall be set to the CustomSettings parameter embedded instance "
"property values.\n "
"Return code of 2 shall be returned if the RequestedAlgoritm "
"parameter has a value that is not contained within the "
"SupportedRequestedAlgorithms property array of the "
"associated DEL_OEMPowerUtilizationManagementCapabilities "
"instance.\n "
"Return code of 2 shall be returned if the RequestedAlgorithm "
"parameter has a value of 3 (\"Custom Settings Based\") and if "
"the embedded instance of the CustomSettings paramater does not "
"contain or has NULL values for the properties that named in the "
"RequiredCustomSettings property array of the associated "
"DEL_OEMPowerUtilizationManagementCapabilities."),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7..32767",
"32768..65535" },
Values { "Completed with No Error", "Not Supported",
"Error Occured", "Busy", "Invalid Reference",
"Invalid Parameter", "Access Denied", "DMTF Reserved",
"Vendor Specified" }]
uint32 RequestPowerUtilizationAlgorithmEI (
[Required, IN, Description (
"Requested algorithm to be employed by the service for power utilization."),
ValueMap { "2", "3", "4", "5", "6", "7", "8"},
Values { "None", "Custom Settings Based", "Maximum Performance",
"Minimum Performance", "OS Specific",
"Active Power Utilization"},
ModelCorrespondence {
"DCIM_OEMPowerUtilizationManagementCapabilities.SupportedRequestedAlgorithms"}]
uint16 RequestedAlgorithm,