White Papers
Power Utilization Management Profile
16 Version 1.0.0a
Table 3 – DCIM_OEMPowerUtilizationManagementService.RequestPowerUtilizationAlgorithmEI()
Method: Parameters
Qualifiers Name Type Description/Values
IN, REQ RequestedAlgorithm uint16 Requested power utilization algorithm
IN CustomSettings String
An embedded instance of
DCIM_OEMPowerUtilizationCustomSetti
ngData that represents the requested
custom settings
OUT Job CIM_ConcreteJob REF Returned if job started
8.1.1 DCIM_OEMPowerUtilizationManagementService.RequestPowerUtilizationAlgorit
hmEI (
) Conditional Support
If the SupportedMethods property array of the associated instance of
DCIM_OEMPowerUtilizationManagementCapabilities contains the value 32769
(RequestPowerUtilizationAlgorithmEI), the RequestPowerUtilizationAlgorithmEI(
) method shall be
implemented and shall not return the value 1 (Not Supported).
If the SupportedMethods property array of the associated instance of
DCIM_OEMPowerUtilizationManagementCapabilities does not contain the value 32769
(RequestPowerUtilizationAlgorithmEI), the RequestPowerUtilizationAlgorithmEI(
) method shall not be
implemented or shall always return the value 1 (Not Supported).
8.2 Method:
DCIM_OEMPowerUtilizationManagementService.RequestPowerUtilizationAl
gorithm ( )
DCIM_OEMPowerUtilizationManagementService.RequestPowerUtilizationAlgorithm( ) method requests a
change in the power utilization algorithm for the managed system. The method does not have any
parameters that utilize embedded instances.
DCIM_OEMPowerUtilizationManagementService.RequestPowerUtilizationAlgorithm(
) return values shall
be as specified in Table 2.
DCIM_OEMPowerUtilizationManagementService.RequestPowerUtilizationAlgorithm(
) parameters are
specified in Table 3.
No standard messages are defined for this method.
Table 4 – DCIM_OEMPowerUtilizationManagementService.RequestPowerUtilizationLimits( )
Method: Return Code Values
Value Description
0 Request was successfully executed.
1 Method is not supported in the implementation.
2 Error occurred