White Papers

Power Topology Profile
34 Version 1.0.0a
10.11 Dell_OEMPowerConfigurationService
Dell_OEMPowerConfigurationService represents the capabilities of the power management service.
Table 29 – Dell_OEMPowerConfigurationService
Properties Requirement Notes
SystemCreationClassName Mandatory
Key
SystemName Mandatory
Key
CreationClassName Mandatory
Key
Name Mandatory
Key
DynamicEngageEnabled Mandatory
PerformanceDegradationEnabled Mandatory
ChangeAffectedElementsAssignedSe
quence
Conditional
ConfigureExternalPowerDomainDefau
lts
Conditional
ConfigureExternalPowerDomains Conditional
10.12 CIM_PowerSupply
CIM_PowerSupply is used to represent the power supply. This class is defined in DSP1015, and shall be
implemented according to DSP1015.
10.13 CIM_RedundancySet – Power Supplies
CIM_RedundancySet is used to represent the aggregation of redundant power supplies. This class is
defined in DSP1015, and shall be implemented according to DSP1015.
10.14 CIM_RedundancySet – External Power Domain
CIM_RedundancySet is used to represent the aggregation of redundant power supplies.
Table 30 – Class: CIM_RedundancySet – External Power Domain
Properties and Methods Requirement Description
InstanceID Mandatory
Key
RedundancyStatus Mandatory
TypeOfSet Mandatory Shall be set to 2 (N+1)
MinNumberNeeded Mandatory Shall match 1 or higher integer
ElementName Mandatory
Shall be formatted as a free-form string of variable
length (pattern “.*”)
10.15 CIM_RegisteredProfile
The CIM_RegisteredProfile class is defined by the Profile Registration Profile. The requirements listed in