White Papers

Power Topology Profile

20 Version 1.0.0a

The default list of operations is as follows:

• GetInstance

• EnumerateInstances

• EnumerateInstanceNames

• Associators

• AssociatorNames

• References

• ReferenceNames

A compliant implementation shall support all of the operations in the default list for each class, unless the

“Requirement” column states something other than Mandatory.

8.6 CIM_AdminDomain – Internal Power Domain

All operations in the default list in section 8.5 are supported as described by DSP0200 version 1.2.

8.7 CIM_AdminDomain – External Power Domain

All operations in the default list in section 8.5 are supported as described by DSP0200 version 1.2.

8.8 CIM_ConcreteIdentity

Table 10 lists operations that either have special requirements beyond those from DSP0200 or shall not

be supported.

Table 10 – CIM_ConcreteIdentity Operations

Operation Requirement Messages

EnumerateInstances Unspecified None

EnumerateInstanceNames Unspecified None

Associators Unspecified None

AssociatorNames Unspecified None

References Unspecified None

ReferenceNames Unspecified None

8.9 CIM_ElementCapabilities

Table 11 lists operations that either have special requirements beyond those from DSP0200 or shall not