White Papers

Active Directory® Client Profile
Version 1.0.0a 13
7.5.2 RequestedState – 5 (No Change) value 192
When Active Directory client state management is supported, the initial value of the
Dell_OEMActiveDirectoryService.RequestedState property shall be 5 (No Change).
193
194
196
197
198
199
200
201
202
203
7.6 Dell_OEMActiveDirectoryService.EnabledState 195
Table 2 relates the values of the Dell_OEMActiveDirectoryService.EnabledState property to the states of
the Active Directory client. The Dell_OEMActiveDirectoryService.EnabledState property shall match the
values that are specified in Table 2. When the RequestStateChange(
) method executes but does not
complete successfully and the Active Directory client is in an indeterminate state, the
Dell_OEMActiveDirectoryService.EnabledState property shall have value of 5 (Not Applicable). The value
of this property may change due to a change to the Active Directory client’s enabled state by non-CIM
implementation.
Table 2 – EnabledState Value Description
Value Description Extended Description
2 Enabled Active Directory authentication shall be enabled.
3 Disabled Active Directory authentication shall be disabled.
5
Not
Applicable
Active Directory client state is indeterminate, or the Active Directory client
state management is not supported.
204
206
207
209
210
211
212
213
214
8 Methods 205
This section includes requirements for support of the intrinsic operations and extrinsic methods of the CIM
elements defined by this profile.
8.1 Method: Dell_OEMActiveDirectoryService.RequestStateChange( ) 208
Invoking the Dell_OEMActiveDirectoryService.RequestStateChange(
) method changes the element’s
state to the value specified in the RequestedState parameter.
Return values for RequestStateChange(
) shall be as specified in Error! Reference source not found.
where the method-execution behavior matches the return-code description. RequestStateChange(
)
method parameters are specified in Error! Reference source not found..
Table 3 – Dell_OEMActiveDirectoryService.RequestStateChange(
) Method: Return Code Values
Value Description
0 Request was successfully executed.
1 Method is not supported in the implementation.
2 Error occurred
4096 Job started