White Papers

21 Configuring RAID in a Dell workstation | 1.0
Confirmation: There is a confirmation step prior to deletion to confirm. All data on the disks will be deleted
upon completion of this step. If you are certain you’d like to proceed, press the Y key on your keyboard.
Upon successful deletion, you will be taken back to the original home screen.
4.2 Configuring RAID using UEFI-HII
When UEFI boot mode is enabled, and Legacy Option ROMs are disabled, the user will not see the Intel
RSTE Option ROM load during system boot. Instead, to create RAID volumes, you must F12 -> “Device
Configuration” menu.
4.2.1 Creating a RAID Volume
Entering the Boot Options menu: During system POST, press the F12 menu when the Dell logo is loading.
You will see a progress bar appear if your keystroke was successful. You will now be presented with a menu
similar to the below.