Users Guide
11. Turn off all nodes. The vSphere Web Client is no longer accessible. Therefore, your options are:
a. Press the power button on each EVO:RAIL node,
b. Use out-of-band management if ACPI is available,
c. Use the vSphere C# Client to connect to each node and use the shutdown command.
EVO:RAIL appliance restart
The appliance is restarted in the reverse order:
1. Turn on the appliance.
NOTE: It may take up to 15 minutes for all services to be fully restored and for EVO:RAIL
Management to be accessible.
2. Log in to vSphere Web Client as administrator@vsphere.local.
3. Click vCenter in the left pane and the vCenter Home page is displayed.
4. Enable High Availably with the following steps:
a. From the Inventory Lists, select Clusters.
b. Select MARVIN-Virtual-SAN-Cluster-id in either the left or center panes
c. Select Manage,, and then Settings in the center pane.
d. Under Services, select vSphere HA.
e. If the center pane says vSphere HA is Turned OFF, click Edit.
f. Check Turn ON vSphere HA.
g. Click OK.
25