Users Guide

CAUTION: Make sure that the DNS IP address is accessible from the network to which
EVO:RAIL is connected and functioning properly. If the DNS server requires access through a
gateway, the gateway must be EVO:RAIL, do not type a DNS IP address. To add a DNS server
after you have configured EVO:RAIL, see the VMware Knowledge Base 2107249 .
Table 13. Network configuration table
Network Configuration
Table4 Row 29
Type the IP address(es) for your DNS server(s).
4 Your DNS server Add all EVO:RAIL IP addresses and hostnames to your corporate DNS
server(s).
• Proxy Server
A proxy server is optional in EVO:RAIL. If you have a proxy server on your network, and if vCenter
Server has to access services outside of your network, you must provide the hostname of the proxy
server, a port, username, and password.
Table 14. Network configuration table
Network Configuration
Table4 Row 30
Type the proxy server hostname, port, username, and password.
• Logging
EVO:RAIL is deployed with vRealize Log Insight. However, you may choose to use your own third-
party syslog server(s). To use vRealize Log Insight, point your browser to the configured IP address;
the username is admin. If you ssh to Log Insight, the username is root. The password, in either case,
is the one you specified for vCenter Server.
NOTE: The default IP address for Log Insight is preconfigured; for example, 192.168.10.201. If
you change the IP address of vCenter Server, you must change the IP address of Log Insight to
be on the same subnet.
Table 15. Network configuration table
Network Configuration
Table4 Row 31
Type the hostname and IP address for Log Insight OR the name(s) of
your existing syslog server(s).
• Qualified EVO:RAIL Partner Integrated Solution
The EVO:RAIL Configuration user interface supports deployment of up to two VM(s) for an optional
Dell-specific integrated solution. Users specify the IP address of a primary VM and optional secondary
VM. EVO:RAIL deploys and configures the VM(s) on the management VLAN (that is, the same VLAN
that EVO:RAIL, vCenter Server, the ESXi hosts, and Log Insight communicate on, as noted in the
EVO:RAIL Network Configuration Table Row 3).
Table 16. Network configuration table
Network Configuration
Table4 Row 32
If your EVO:RAIL appliance has a Dell-integrated solution, please type
the IP address(es) for the primary VM and secondary VM (if there is
one).
Out-of-Band Management (optional)
Remote- or lights out management is available on each node through a BMC port. To use out-of-band
management, connect the BMC port on each node to a separate switch to provide physical network
20