Administrator Guide

Constant/Value Description
0x803100AF
FVE_E_EDRIVE_BAND_IN_USE
0x803100B0
The drive cannot be managed by BitLocker because the drive's
hardware encryption feature is already in use.
FVE_E_EDRIVE_DISALLOWED_BY_GP
0x803100B1
Group Policy settings do not allow the use of hardware-based
encryption.
FVE_E_EDRIVE_INCOMPATIBLE_VOLUME
0x803100B2
The drive specied does not support hardware-based encryption.
FVE_E_NOT_ALLOWED_TO_UPGRADE_WHILE_CONVERTING
0x803100B3
BitLocker cannot be upgraded during disk encryption or decryption.
FVE_E_EDRIVE_DV_NOT_SUPPORTED
0x803100B4
Discovery Volumes are not supported for volumes using hardware
encryption.
FVE_E_NO_PREBOOT_KEYBOARD_DETECTED
0x803100B5
No preboot keyboard detected. The user may not be able to provide
required input to unlock the volume.
FVE_E_NO_PREBOOT_KEYBOARD_OR_WINRE_DETECTED
0x803100B6
No preboot keyboard or Windows Recovery Environment detected.
The user may not be able to provide required input to unlock the
volume.
FVE_E_POLICY_REQUIRES_STARTUP_PIN_ON_TOUCH_DEVICE
0x803100B7
Group Policy settings require the creation of a startup PIN, but a
preboot keyboard is not available on this device. The user may not
be able to provide required input to unlock the volume.
FVE_E_POLICY_REQUIRES_RECOVERY_PASSWORD_ON_TOUC
H_DEVICE
0x803100B8
Group Policy settings require the creation of a recovery password,
but neither a preboot keyboard nor Windows Recovery
Environment is available on this device. The user may not be able to
provide required input to unlock the volume.
FVE_E_WIPE_CANCEL_NOT_APPLICABLE
0x803100B9
Wipe of free space is not currently taking place.
FVE_E_SECUREBOOT_DISABLED
0x803100BA
BitLocker cannot use Secure Boot for platform integrity because
Secure Boot has been disabled.
FVE_E_SECUREBOOT_CONFIGURATION_INVALID
0x803100BB
BitLocker cannot use Secure Boot for platform integrity because
the Secure Boot conguration does not meet the requirements for
BitLocker.
FVE_E_EDRIVE_DRY_RUN_FAILED
0x803100BC
Your computer does not support BitLocker hardware-based
encryption. Check with your computer manufacturer for rmware
updates.
FVE_E_SHADOW_COPY_PRESENT
0x803100BD
BitLocker cannot be enabled on the volume because it contains a
Volume Shadow Copy. Remove all Volume Shadow Copies before
encrypting the volume.
Dell Data Security Endpoint Security Suite Pro
Troubleshooting
121