Administrator Guide

Constant/Value Description
FVE_E_AUTH_INVALID_CONFIG
0x80310045
The Boot Conguration Data (BCD) settings have changed since
BitLocker Drive Encryption was enabled.
FVE_E_FIPS_DISABLE_PROTECTION_NOT_ALLOWED
0x80310046
The Group Policy setting requiring FIPS compliance prohibits the
use of unencrypted keys, which prevents BitLocker from being
suspended on this drive. Please contact your domain administrator
for more information.
FVE_E_FS_NOT_EXTENDED
0x80310047
This drive cannot be encrypted by BitLocker Drive Encryption
because the le system does not extend to the end of the drive.
Repartition this drive and then try again.
FVE_E_FIRMWARE_TYPE_NOT_SUPPORTED
0x80310048
BitLocker Drive Encryption cannot be enabled on the operating
system drive. Contact the computer manufacturer for BIOS
upgrade instructions.
FVE_E_NO_LICENSE
0x80310049
This version of Windows does not include BitLocker Drive
Encryption. To use BitLocker Drive Encryption, please upgrade the
operating system.
FVE_E_NOT_ON_STACK
0x8031004A
BitLocker Drive Encryption cannot be used because critical
BitLocker system les are missing or corrupted. Use Windows
Startup Repair to restore these les to your computer.
FVE_E_FS_MOUNTED
0x8031004B
The drive cannot be locked when the drive is in use.
FVE_E_TOKEN_NOT_IMPERSONATED
0x8031004C
The access token associated with the current thread is not an
impersonated token.
FVE_E_DRY_RUN_FAILED
0x8031004D
The BitLocker encryption key cannot be obtained. Verify that the
TPM is enabled and ownership has been taken. If this computer
does not have a TPM, verify that the USB drive is inserted and
available.
FVE_E_REBOOT_REQUIRED
0x8031004E
You must restart your computer before continuing with BitLocker
Drive Encryption.
FVE_E_DEBUGGER_ENABLED
0x8031004F
Drive encryption cannot occur while boot debugging is enabled. Use
the bcdedit command-line tool to turn o boot debugging.
FVE_E_RAW_ACCESS
0x80310050
No action was taken as BitLocker Drive Encryption is in raw access
mode.
FVE_E_RAW_BLOCKED
0x80310051
BitLocker Drive Encryption cannot enter raw access mode for this
drive because the drive is currently in use.
FVE_E_BCD_APPLICATIONS_PATH_INCORRECT
0x80310052
The path specied in the Boot Conguration Data (BCD) for a
BitLocker Drive Encryption integrity-protected application is
incorrect. Please verify and correct your BCD settings and try
again.
114 Dell Data Security Endpoint Security Suite Pro
Troubleshooting