Administrator Guide

Constant/Value Description
FVE_E_AD_NO_VALUES
0x8031000D
The attribute read from Active Directory does not contain any
values. The BitLocker recovery information may be missing or
corrupted.
FVE_E_AD_ATTR_NOT_SET
0x8031000E
The attribute was not set. Verify that you are logged on with a
domain account that has the ability to write information to Active
Directory objects.
FVE_E_AD_GUID_NOT_FOUND
0x8031000F
The specied attribute cannot be found in Active Directory Domain
Services. Contact your domain administrator to verify that any
required BitLocker Active Directory schema extensions have been
installed.
FVE_E_BAD_INFORMATION
0x80310010
The BitLocker metadata for the encrypted drive is not valid. You can
attempt to repair the drive to restore access.
FVE_E_TOO_SMALL
0x80310011
The drive cannot be encrypted because it does not have enough
free space. Delete any unnecessary data on the drive to create
additional free space and then try again.
FVE_E_SYSTEM_VOLUME
0x80310012
The drive cannot be encrypted because it contains system boot
information. Create a separate partition for use as the system drive
that contains the boot information and a second partition for use as
the operating system drive and then encrypt the operating system
drive.
FVE_E_FAILED_WRONG_FS
0x80310013
The drive cannot be encrypted because the le system is not
supported.
FVE_E_BAD_PARTITION_SIZE
0x80310014
The le system size is larger than the partition size in the partition
table. This drive may be corrupt or may have been tampered with.
To use it with BitLocker, you must reformat the partition.
FVE_E_NOT_SUPPORTED
0x80310015
This drive cannot be encrypted.
FVE_E_BAD_DATA
0x80310016
The data is not valid.
FVE_E_VOLUME_NOT_BOUND
0x80310017
The data drive specied is not set to automatically unlock on the
current computer and cannot be unlocked automatically.
FVE_E_TPM_NOT_OWNED
0x80310018
You must initialize the TPM before you can use BitLocker Drive
Encryption.
FVE_E_NOT_DATA_VOLUME
0x80310019
The operation attempted cannot be performed on an operating
system drive.
FVE_E_AD_INSUFFICIENT_BUFFER
0x8031001A
The buer supplied to a function was insucient to contain the
returned data. Increase the buer size before running the function
again.
FVE_E_CONV_READ A read operation failed while converting the drive. The drive was
not converted. Please re-enable BitLocker.
110 Dell Data Security Endpoint Security Suite Pro
Troubleshooting