Reference Guide

Security Management Server Virtual v10.2.11 AdminHelp
events provide information about the
state of several important systems on
the computer. They are logged on
configurable intervals and generally
used when events are remotely
collected.
False Accept Rate of Fingerprint Medium High - 1 in 100,000
The False Accept Rate is the
probability of receiving a false
acceptance decision when comparing
fingerprints scanned from different
fingers.
You can select one of the following
FAR values:
* Medium (1 in 10,000)
* Medium High (1 in 100,000)
* High (1 in 1,000,000)
For example: if
you select Medium
High, on average, one false
acceptance will occur when a
fingerprint is compared against one
hundred thousand fingerprints scanned
from different fingers.
The higher the setting, the lower the
chance of receiving a false
acceptance. Howe
ver, at the High
setting, the system may reject
legitimate fingerprints.
NOTE
: The FAR is set on a per
verification basis. When matching a
fingerprint against fingerprints of
multiple users (identification), the
internally used FAR is automatically
adjuste
d to maintain the same
effective FAR as was selected for a
single match.
Minimum Number of Fingerprints to
Enroll
2
The minimum number of fingerprints
required to be enrolled.
Maximum Number of Fingerprints to
Enroll
10
The maximum number of fingerprints
required to be enrolled.
Allow Users to Enroll Credentials Selected
Set to Selected to allow users to
enroll their own credentials without
administrator involvement.
Allow Users to Modify Credentials Selected
Set to Selected to allow users to
modify the
ir own credentials that
have been previously set up or
enrolled.
183