Users Guide

￭ RAID ON is not supported because access to read and write RAID-related data (at a sector that is not available on a
locked non-NVMe drive) is not accessible at start-up, and cannot wait to read this data until after the user is logged
on.
￭ The operating system will crash when switched from RAID ON > AHCI if the AHCI controller drivers are not pre-
installed. For instructions on how to switch from RAID > AHCI (or vice versa), see http://www.dell.com/support/
article/us/en/19/SLN306460.
Supported OPAL compliant SEDs require updated Intel Rapid Storage Technology Drivers, located at http://www.dell.com/
support/home/us/en/19/product-support/product/dell-dp-endpt-security-suite-enterprise/drivers.
Dell recommends Intel Rapid Storage Technology Driver version 15.2.0.0 or later, with NVMe drives.
[DDPC-5941, DDPC-6219]
BitLocker Manager v8.13
● The top part of the option "Use a password to unlock the drive" is cut off in the BitLocker Drive Encryption dialog.
[DDPC-5728]
● Added 8/2017 - Due to changes to Microsoft validation profiles level (PCRs), BitLocker Manager might not begin encrypting
on Windows 10. To correct this issue, obtain and apply the Enterprise Server v9.7 update that corrects this issue or upgrade
to Security Management Server v9.8. For more information about the v9.7 update, see http://www.dell.com/support/
article/us/en/19/sln305948/. [DDPC-5790]
New Features and Functionality v1.3
● Endpoint Security Suite Enterprise now supports persistent and non-persistent VMware and Citrix VDI clients with Dell Data
Protection Server v9.6 and later.
● Added 4/2017 - The Encryption client is now supported with Windows Server 2016 - Standard Edition, Essentials Edition, and
Datacenter Edition.
● Added 4/2017 - BitLocker Manager is now supported with Server 2012 and Server 2012 R2 - Standard Edition and Enterprise
Edition (64-bit).
● The PBA user interface has a new look and feel.
● New policies allow the administrator to configure the maximum number of Dell Server connection attempts and the retry
interval for the Encryption client running on a server OS.
● A standalone version of Encrypt for Sharing, Encrypt4Share.exe, is now added to the <installation folder>\Dell Data
Protection\Encryption folder at installation and can be accessed from the Windows Start menu.
Resolved Technical Advisories v1.3
Advanced Threat Prevention v1.3
● Effective policies from the Dell Server are now automatically exported and stored in C:\ProgramData\Dell\Dell Data
Protection\Policy\Policy-xxxxxxxx.xml, where "xxxxxxxx" is the sequence number of the policy. By default, the last 10
policies received from the Server are stored. To change the default number of policies stored, change the value of the
following registry key. The valid range is 0 - 100.
["HKEY_LOCAL_MACHINE\SOFTWARE\Dell\Dell Data Protection]
"MaxPoliciesStored" =dword:00000010
Valid range = 0 - 100
[DDPC-4583]
Added 05/2018 - An issue resulting with a "Not Protected" message to display until the computer was rebooted has been
resolved. [CYL-435]
Added 4/2017 - Resolved Technical Advisories v2.0.1421
The following issues are resolved in v1.3.1421, available when an organization is enrolled for Agent Auto Update on the Dell
Server. For instructions on how to enroll, refer to AdminHelp, accessible from the Remote Management Console.
Technical Advisories
49